Hofmann monty 1625

Product type
Tire Changers

The Hofmann monty 1625 series are high-performance tire changers designed to service standard and performance wheels on automobiles and light trucks. Designed for performance tires with up to 24" wheel clamping diameter, the monty 1625 and 1625em can handle a wide variety of car, light truck or SUV wheel and tire assemblies. The patented EasyMont Pro Bead Assist on the monty 1625em holds the bead into the drop center making one-operator tire changes possible on low-profile, high-performance and run-flat tires.

Accommodates Large Wheel & Tire Assemblies

Allowing for a tire diameter of 50" on the monty 1625 (42" on monty 1625em), and outer-wheel diameters of 24", the monty 1625/1625em can handle wheel and tire assemblies found on cars and light trucks.

Dual Wheel Clamping Cylinders

Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheels due to rim slippage.

Four-Jaw Clamping Chuck

Self-centering and clamps wheels with either 26" inner or 24" outer diameter.

Multi-Position Bead Breaker

6,000 lbs. of power at the bead shovel and a range of up to 17" wide. The two-stage pneumatic cylinder provides very precise power toggled with the foot pedal as it is needed. Both the stiffest and the softest sidewalls are a snap. No damage to tires while loosening the bead!

Powerful Tire Inflation System

Foot pedal operated. Powerful air blast. Each movable jaw is precisely set to the exact position under the wheel to seal the tire bead.

Built To Last

Heavy, solid ½" thick steel clamping table. Rugged steel-reinforced chasis. Rust-proof air cylinders and valves. Compressed air lubricator and regulator on-board - keeps valves and cylinders maintenance-free!

EasyMont Bead Assist

EasyMont Pro features a three-piece design with a Top Roller, Pressing Foot, and Lifting Disc. Each piece provides a specialized function that assists a single operator in mounting/demounting low-profile and high-performance tires.
EasyMont Bead Assist Device

* Assists operator with bead lubrication, wheel clamping, lower bead lifting, re-loosens beads, and allows easy one-operator mounting of the stiff upper bead.
* EAA0329G36A - Standard with model M1625EM110, Optional with model MONTY1625
* Top Roller:
o Demounting - Presses down on the tire sidewall, provides clearance for easy positioning of the mount/demount head, upper bead lubrication, and easy insertion of the demount tire lever.
o Mounting - The roller retains the bead under the nose of the mounting head. Works in conjunction with the Pressing Foot to keep the tire bead below the wheel drop center as the tire rotates 360° during the mounting process.
* Pressing Foot:
o Tire Clamping - Presses the wheel in the center hole which allows the lower bead to clear the wheel’s rim for easy clamping.
o Tire Mounting - Presses the upper tire sidewall into the drop center and holds it in place during the 360° rotation required for mounting the upper bead is complete. Allows one-technician operation for mounting stiff sidewall, run-flat and high-performance tires.
* Lifting Disc: Loosens lower beads that often re-seat. To remove the upper bead, the lower bead must be free to move vertically during demounting. Provides an "extra hand" to lift and hold wide tires to facilitate insertion of the demount lever to remove the lower bead.
* For better cosmetic protection of expensive tires and wheels, an optional adjustable bead breaking disc can be fitted to the EasyMont Pro. This disc allows for breaking the tire beads using 360° tire rotation while the disc gently presses the tire bead dynamically, thus preserving tire and wheel.

Optional Wheel Protectors

Protects even the most expensive alloy wheels and provides extra insurance with ultimate wheel protection so that even the most expensive wheels can be changed without any additional expense.

Overall Wheel Clamping Diameter: 10" - 26"
Inner-Wheel Clamping Diameter: 12" - 26"
Outer-Wheel Clamping Diameter: 10" - 24"
Bead Breaker Range: 2" - 18"
Bead Loosening Power: 6,000 lbs.
Maximum Wheel Width: 15"
Maximum Outer Tire Diameter: 50" (monty 1625)
42" (monty 1625em)
Compressed Air Supply: 100 to 175 psi @ 5 CFM
Work Area Dimensions (D x W x H): 72" x 68" x 85"
Electrical Requirements: 120V, 1Ph, 60Hz
Shipping Weight: 805 lbs. (monty 1625em)
620 lbs. (monty 1625)

Order now!